Machining of plastics can be advantageous for applications requiring low volume production, close tolerance dimensions and/or difficult to mold configurations. There is an array of plastics to choose from; highly engineered, high performance products to low cost, low performance. Determining which is appropriate for a particular application can be challenging.
Typically an engineer will require 3 or less characteristics that are critical to the functionality of the component. A basic search will prioritize and look for a material that can supply all three. The below list presents only the most common machined plastics. Many plastics are available with fillers to enhance particular characteristics. For example, glass fill improves tensile strength while reducing machinability. Molybdenum disulphide improves wear while reducing dimensional stability.
For a thorough search of plastics, please contact the Connecticut Plastics’ engineering department at 203-265-3299 or on visit our inquiry page where you can request a quote.
美女15分钟叫床声视频,男人将机机桶女人30分钟视频Stock shapes are typically clear but once machined they become translucent to opaque. Polishing is required to return the component to clear. Polishing methods are direct machine polish, vapor polish, flame polish, and buffing
美女15分钟叫床声视频,男人将机机桶女人30分钟视频Tensile strength (plastic in tension) and compression strength (plastic under compression) are important values for structural applications.
Consider either continuous service temperature in air or heat deflection temperature if under load.
美女15分钟叫床声视频,男人将机机桶女人30分钟视频A combination of pressure and velocity that determines whether a plastic material has enough thermal and structural ability to withstand a bearing application in rotational wear.
Machined plastics do not have the structural stability of metals. This is primarily caused by their tendency to absorb water and a high coefficient of thermal expansion. Stable materials have low water absorption with a low CTFE.
Chemical resistance of plastics is variable. Some materials show an almost universal resistance to chemicals while others are very sensitive and stress crack when exposed. Best practice is to consult a reference guide for a specific chemical/plastic interaction.
A measurement of a plastics ability to withstand a sudden shock or a blow. Do not confuse this with resistance to steady state stress where failure can occur from chemical attack or configuration stress risers. Polycarbonate can tolerate high impact but stress cracks from steady loading.
General measure of cost of the material. Higher performance engineered plastics are more expensive.
Suitability for use in medical device applications. Plastics carry the USP class VI designation.
The Food and Drug administrations’ classification for plastics which contact food.
美女15分钟叫床声视频,男人将机机桶女人30分钟视频Same as autoclaving, a process where steam is used to sterilize plastics for medical device use.
Resistance to UV typically seen in outdoor use. Plastics without resistance will age and embrittle. Because of the coloring, most black plastics have at least a small amount of resistance.